Installation/Uninstallation guide for my ROMs.
Installation:
*You can install ROM only from Windows XP. Windows
Vista and etc NOT supported!
You can install Windows XP in virtual machine if you have not it.
*You must have installed 1.12 radio.If it is not
installed read at first Radio installation
*Download archive
*Extract files from it
*Enter bootloader mode on device (Press POWER + CAMERA + RESET,
you will see Serial/USB at top and 1.0X at bottom)
You need press and hold POWER + CAMERA buttons and press RESET via stylus.
Backlight in bootloader mode not enabled, so screen will be very dark.
*Connect via USB to PC
*Run Update.exe
*Follow instructions in Update program.
*At the end you should see at device screen: "100% Upgrade OS Image Complete".
Device screen still dark- remember it!
*After flashing press RESET via stylus.
*Don't touch device, wait while "welcome screen" appear.
*Press screen, do calibration and start using device.
NOTE: This is ONLY ONE
right instruction how to flash your device with my rom.
otherwise your device can no longer boots, also you can get brick.
be sure, before doing anything wrong!
Uninstallation
*Enter bootloader mode on device (Press POWER +
CAMERA + RESET, you will see Serial/USB at top and 1.0X at bottom)
Backlight in bootloader mode not enabled, so screen will be very dark.
*Connect via USB to PC
*Install ORIGINAL 1.12 or 1.13 ROM. No big storage etc. Install
original one!! But you need use installer without CID check!
[YOU *MUST* REPLACE ROMUpgradeUt.exe
TO MaUpgradeUt_noID.exe]
*Now you can flash any other old custom roms.
NOTE: This is ONLY ONE
right instruction how to uninstall my rom, otherwise you can have problems with
new rom.
Misc Info
Hard reset - press and hold
Contacts and Calendar button during boot, you will see
message on screen.
Press Green key to confirm
or press Red key to cancel.
Although old method seems to work, you should not use it.
-Cotulla